Drinking water in 3242 (Austria)
For this postcode Wasserversorgungsanlage der Marktgemeinde Oberndorf an der Melk publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.
The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
at-oberndorf-an-der-melk gesamt
Wasserversorgungsanlage der Marktgemeinde Oberndorf an der MelkAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 13 mg/l | 50 mg/l | 26 % | Single value |
| Sulphate | 42 mg/l | 250 mg/l | 17 % | Single value |
| Sodium | 7,9 mg/l | 200 mg/l | 4 % | Single value |
Show all recorded parameters (11 — most recent value per parameter)
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 13 mg/l | 50 mg/l | 26 % | Single value |
Indicator parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 8,8 mg/l | 200 mg/l | 4 % | Single value |
| Conductivity (25 °C) | 669 µS/cm | 2,500 µS/cm | — | Single value |
| pH | 7,4 | 6,5–9,5 | — | Single value |
| Sodium | 7,9 mg/l | 200 mg/l | 4 % | Single value |
| Sulphate | 42 mg/l | 250 mg/l | 17 % | Single value |
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 110 mg/l | 400 mg/l | 27 % | Single value |
| Carbonate hardness | 19,7 °dH | — | — | Single value |
| Magnesium | 27 mg/l | 150 mg/l | 18 % | Single value |
| Potassium | 1,7 mg/l | 50 mg/l | 3 % | Single value |
| Total hardness | 21,4 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 1 more supply zone in this postcode
Marktgemeinde Oberndorf an der Melk
Wasserversorgungsanlage der Marktgemeinde Oberndorf an der MelkAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 13 mg/l | 50 mg/l | 26 % | Single value |
| Sulphate | 42 mg/l | 250 mg/l | 17 % | Single value |
| Sodium | 7,9 mg/l | 200 mg/l | 4 % | Single value |
Show all recorded parameters (11 — most recent value per parameter)
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 13 mg/l | 50 mg/l | 26 % | Single value |
Indicator parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 8,8 mg/l | 200 mg/l | 4 % | Single value |
| Conductivity (25 °C) | 669 µS/cm | 2,500 µS/cm | — | Single value |
| pH | 7,4 | 6,5–9,5 | — | Single value |
| Sodium | 7,9 mg/l | 200 mg/l | 4 % | Single value |
| Sulphate | 42 mg/l | 250 mg/l | 17 % | Single value |
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 110 mg/l | 400 mg/l | 27 % | Single value |
| Carbonate hardness | 19,7 °dH | — | — | Single value |
| Magnesium | 27 mg/l | 150 mg/l | 18 % | Single value |
| Potassium | 1,7 mg/l | 50 mg/l | 3 % | Single value |
| Total hardness | 21,4 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 3242
- How hard is the water in Postcode 3242?
- Wasserversorgungsanlage der Marktgemeinde Oberndorf an der Melk publishes a total hardness of 21.4 °dH for the supply zone at-oberndorf-an-der-melk gesamt. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 27.02.2026, retrieved on 11/08/2026.
- How much nitrate is in the drinking water in Postcode 3242?
- Wasserversorgungsanlage der Marktgemeinde Oberndorf an der Melk publishes a nitrate value of 13 mg/l for the supply zone at-oberndorf-an-der-melk gesamt. The statutory parametric value is 50 mg/l; the measured value represents 26 % of the parametric value. Basis: 27.02.2026, retrieved on 11/08/2026.
- Who supplies the drinking water in Postcode 3242?
- Wasserversorgungsanlage der Marktgemeinde Oberndorf an der Melk. The values shown here come from the supply zone at-oberndorf-an-der-melk gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.