Drinking water in 3104 (Austria)
One supply zone, water supplier: Magistrat der Stadt St. Pölten (WVA St. Pölten).
The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Brunnen IV, Harland
Magistrat der Stadt St. Pölten (WVA St. Pölten)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 22/01/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,9 mg/l | 50 mg/l | 16 % | Single value |
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Sulphate | 37,0 mg/l | 250 mg/l | 15 % | Single value |
| Sodium | 5,9 mg/l | 200 mg/l | 3 % | Single value |
Show all recorded parameters (20 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 Unit not stated in the document | 0/100 ml | — | Single value |
Chemical parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,9 mg/l | 50 mg/l | 16 % | Single value |
| Nitrite | <0,006 mg/l below limit of quantification | 0.1 mg/l | < 6 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | 0,02 mg/l | 0.5 mg/l | 4 % | Single value |
| Chloride | 10 mg/l | 200 mg/l | 5 % | Single value |
| Coliform bacteria | 0 Unit not stated in the document | 0/100 ml | — | Single value |
| Colour | <0,04 1/m below limit of quantification | — | — | Single value |
| Iron | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Manganese | < 0,006 mg/l below limit of quantification | 50 µg/l | < 12 % * | Single value |
| pH | 7,6 | 6,5–9,5 | — | Single value |
| Sodium | 5,9 mg/l | 200 mg/l | 3 % | Single value |
| Sulphate | 37,0 mg/l | 250 mg/l | 15 % | Single value |
| Temperature | 10,9 °C | — | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 4,80 mmol/l | — | — | Single value |
| Calcium | 74,0 mg/l | 400 mg/l | 18 % | Single value |
| Carbonate hardness | 13,5 °dH | — | — | Single value |
| Magnesium | 21,0 mg/l | 150 mg/l | 14 % | Single value |
| Potassium | 1,9 mg/l | 50 mg/l | 4 % | Single value |
| Total hardness | 15,3 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 3104
- How hard is the water in Postcode 3104?
- Magistrat der Stadt St. Pölten (WVA St. Pölten) publishes a total hardness of 15.3 °dH for the supply zone Brunnen IV, Harland. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: Publication by the water supplier, retrieved on 08/08/2026.
- How much nitrate is in the drinking water in Postcode 3104?
- Magistrat der Stadt St. Pölten (WVA St. Pölten) publishes a nitrate value of 7,9 mg/l for the supply zone Brunnen IV, Harland. The statutory parametric value is 50 mg/l; the measured value represents 16 % of the parametric value. Basis: Publication by the water supplier, retrieved on 08/08/2026.
- Who supplies the drinking water in Postcode 3104?
- Magistrat der Stadt St. Pölten (WVA St. Pölten). The values shown here come from the supply zone Brunnen IV, Harland and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.